Administrator Handbook | Table of contents |
The Host Bulk configuration plugin allows you to setup the parameters of multiple hosts in few operations. You can change for example the polling time interval of all the hosts of your directory in 3 mouse clicks.
The plugin is also used for launching dedicated audit based on LUA script on a set of hosts.
With this direct plugin tool the configuration of hundreds of hosts located anywhere in your directory can be change in a blick of an eyes.
When you open the program you can see in the left pane a copy of your directory. From there you can drag and drop a container, network objetc or a host into the Selected host area. If you select a container or a host, all the host located under the object are selected and added to the Selected Host List.
You can change parameters or run LUA script program of the selected host.
To apply the new parameters check the Use this parameter for host selection box and click the Process button.
If you want to launch one of the LUA script dedicated to this program, select the Scripting tab and double click one of the script.
A dialog box asking you to confirm the script execution
Example of the script execution
Liste of available scripts and description
Audit Cisco CPU process | Display information about the CPU usage of a Cisco IOS devices |
Audit host connectivity from swicth list | |
Audit Host Interface | List the network interface of the selected host and display traffic and errors statistics |
Audit Routing Table | List the network and routes of the selected hosts |
Audit software installed | List the software installed on the selected hosts. Require HOST RESOURCE MIB. |
Audit storage | List the storage devices (disk, cdrom, physical memory, logical memory) installed on the selected hosts. Require HOST RESOURCE MIB. |
Audit system | List information on the system (From the system entry in MIB II) |
Change community read only | Change the read only SNMP community form the selected host |
Change community read/write | Change the read/write SNMP community form the selected host |
Change criticity event number | |
Change criticity level | |
Change directory icon to default | Replace the current icon used by the host object in the directory by the default icon : |
Change directory icon to host | Replace the current icon used by the host object in the directory by the host icon : |
Change directory icon to hub | Replace the current icon used by the host object in the directory by the hub icon : |
Change directory icon to phone | Replace the current icon used by the host object in the directory by the phone icon : |
Change directory icon to printer | Replace the current icon used by the host object in the directory by the printer icon : |
Change directory icon to router | Replace the current icon used by the host object in the directory by the router icon : |
Change directory icon to server | Replace the current icon used by the host object in the directory by the server icon : |
Change directory icon to switch | Replace the current icon used by the host object in the directory by the switch icon : |
Change polling interval for host selection | Change the SNMP or PING polling interval for the selected hosts (see host properties) |
Change status 3 threshold | Change the status 3 (yellow status) threshold of the polling for the selected hosts (see host properties) |
Change status 4 threshold | Change the status 3 (red status) threshold of the polling of the selected hosts (see host properties) |
Change user 1 parameters | Change the custome parameter 1 of the selected hosts |
Change user 2 parameters | Change the custome parameter 2 of the selected hosts |
Change user 3 parameters | Change the custome parameter 3 of the selected hosts |
Display ARP table | Display the MAC address table of the selected host |
Display Cisco Call Manager phone entries | |
Display Host Selection Information | Display Loriotpro Directory configuration information of the selected host |
Display MAC addresses associated to host selection | |
Display phone list and switch ports association | |
Display SLA for Day | Display a quality of service report based on the predefined Service Level Agreement contract for the last 24 hours |
Dispaly SLA for Week | Display a quality of service report based on the predefined Service Level Agreement contract for the last 7 days |
Display SLA for Month | Display a quality of service report based on the predefined Service Level Agreement contract for the last 30 days |
Update MAC association from ARP table selection |
Audit Host Interface
------------------------------------------
Host Router-1603-Cisco
IP add : [12.1.1.250]
Audit Switch Connectivity
Audit MAC position from switch list : (null)
End of Search
Audit Host interfaces
Audit Interfaces for : 12.1.1.250
Host UpTime (0 days 0 hours 1 minutes 44.000 secondes)
List interfaces(6)
ifdescr[BRI0]
ifindex[1] iftype[propPointToPointSerial] ifmtu[1500] ifspeed[64000] ifadminstatus[up] ifoperstatus[dormant]
iflastchange[4758] ifinoctets[0] ifoutoctets[0] ifinerrors[0] ifouterrors[0]
ifdescr[BRI0:1]
ifindex[2] iftype[propPointToPointSerial] ifmtu[1500] ifspeed[64000] ifadminstatus[up] ifoperstatus[dormant]
iflastchange[1468] ifinoctets[0] ifoutoctets[0] ifinerrors[0] ifouterrors[0]
ifdescr[BRI0:2]
ifindex[3] iftype[propPointToPointSerial] ifmtu[1500] ifspeed[64000] ifadminstatus[up] ifoperstatus[dormant]
iflastchange[1473] ifinoctets[0] ifoutoctets[0] ifinerrors[0] ifouterrors[0]
ifdescr[Ethernet0]
ifindex[4] iftype[ethernetCsmacd] ifmtu[1500] ifspeed[10000000] ifadminstatus[up] ifoperstatus[up]
iflastchange[4758] ifinoctets[7976] ifoutoctets[6723] ifinerrors[0] ifouterrors[0]
Interface LastChange (0 days 0 hours 0 minutes 47.000 secondes)
IF Name [Et0] IF Alias [--]
ifdescr[Serial0]
ifindex[5] iftype[propPointToPointSerial] ifmtu[1500] ifspeed[1544000] ifadminstatus[up] ifoperstatus[down]
iflastchange[4760] ifinoctets[0] ifoutoctets[0] ifinerrors[0] ifouterrors[0]
ifdescr[Null0]
ifindex[6] iftype[other] ifmtu[1500] ifspeed[4294967295] ifadminstatus[up] ifoperstatus[up]
iflastchange[0] ifinoctets[0] ifoutoctets[0] ifinerrors[0] ifouterrors[0]
Interface LastChange (0 days 0 hours 0 minutes 0 secondes)
IF Name [Nu0] IF Alias [--]
Scan Ended
Audit routing table
------------------------------------------
Host PENELOPE
IP add : [12.1.1.4]Audit routing table
Audit Routing Table for : 12.1.1.4
List Routes(14)
Dest[0.0.0.0] Mask[0.0.0.0] Policy[indirect] NextHop[12.1.1.252] Index[9] Type[indirect] Proto[netmgmt] Age[6076] Metric1[276] Metric2[0] Metric3[0]
Dest[12.1.1.0] Mask[255.255.255.0] Policy[direct] NextHop[12.1.1.4] Index[9] Type[direct] Proto[netmgmt] Age[6041] Metric1[276] Metric2[0] Metric3[0]
Dest[12.1.1.4] Mask[255.255.255.255] Policy[direct] NextHop[12.1.1.4] Index[9] Type[direct] Proto[netmgmt] Age[6041] Metric1[276] Metric2[0] Metric3[0]
Dest[12.1.1.255] Mask[255.255.255.255] Policy[direct] NextHop[12.1.1.4] Index[9] Type[direct] Proto[netmgmt] Age[6041] Metric1[276] Metric2[0] Metric3[0]
Dest[127.0.0.0] Mask[255.0.0.0] Policy[direct] NextHop[127.0.0.1] Index[1] Type[direct] Proto[netmgmt] Age[6076] Metric1[306] Metric2[0] Metric3[0]
Dest[127.0.0.1] Mask[255.255.255.255] Policy[direct] NextHop[127.0.0.1] Index[1] Type[direct] Proto[netmgmt] Age[6076] Metric1[306] Metric2[0] Metric3[0]
Dest[127.255.255.255] Mask[255.255.255.255] Policy[direct] NextHop[127.0.0.1] Index[1] Type[direct] Proto[netmgmt] Age[6076] Metric1[306] Metric2[0] Metric3[0]
Dest[169.254.0.0] Mask[255.255.0.0] Policy[direct] NextHop[12.1.1.4] Index[9] Type[direct] Proto[netmgmt] Age[6029] Metric1[30] Metric2[0] Metric3[0]
Dest[169.254.255.255] Mask[255.255.255.255] Policy[direct] NextHop[12.1.1.4] Index[9] Type[direct] Proto[netmgmt] Age[6029] Metric1[276] Metric2[0] Metric3[0]
Dest[192.168.52.0] Mask[255.255.255.0] Policy[direct] NextHop[12.1.1.4] Index[9] Type[direct] Proto[netmgmt] Age[6041] Metric1[276] Metric2[0] Metric3[0]
Dest[192.168.52.100] Mask[255.255.255.255] Policy[direct] NextHop[12.1.1.4] Index[9] Type[direct] Proto[netmgmt] Age[6041] Metric1[276] Metric2[0] Metric3[0]
Dest[192.168.52.255] Mask[255.255.255.255] Policy[direct] NextHop[12.1.1.4] Index[9] Type[direct] Proto[netmgmt] Age[6041] Metric1[276] Metric2[0] Metric3[0]
Dest[224.0.0.0] Mask[240.0.0.0] Policy[direct] NextHop[127.0.0.1] Index[1] Type[direct] Proto[netmgmt] Age[6076] Metric1[306] Metric2[0] Metric3[0]
Dest[255.255.255.255] Mask[255.255.255.255] Policy[direct] NextHop[127.0.0.1] Index[1] Type[direct] Proto[netmgmt] Age[6076] Metric1[306] Metric2[0] Metric3[0]
Scan Ended
Audit software installed
------------------------------------------
Host PENELOPE
IP add : [12.1.1.4]Audit software installed
Audit Software Installed for : 12.1.1.4
List installed Softwares
index[.1 ] Adobe Flash Player ActiveX [application] [2007-7-26,13:16:58.0]
index[.2 ] Adobe Photoshop 6.0 [application] [2007-7-26,12:49:10.0]
index[.3 ] Adobe Dreamweaver CS3 [application] [2007-12-27,14:59:46.0]
index[.4 ] Copernic Agent Basic [application] [2008-1-18,18:38:8.0]
index[.5 ] CutePDF Writer 2.7 [application] [2008-5-2,15:34:8.0]
index[.6 ] Microsoft Office Enterprise 2007 [application] [2007-7-26,17:38:42.0]
index[.7 ] Fastream IQ Web/FTP Server Engine [application] [2008-1-14,8:18:50.0]
index[.8 ] Fastream IQ Web/FTP Server GUI [application] [2008-1-14,8:18:46.0]
index[.9 ] GESTIMUM 3.7.1.377 [application] [2007-7-5,18:41:46.0]
index[.10 ] HP Imaging Device Functions 8.0 [application] [2008-5-21,18:13:42.0]
index[.11 ] Maxtor OneTouch III [application] [2007-9-7,19:6:12.0]
....
.....
index[.269 ] hrDeviceNetwork [Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller - Virtua] [unknown]
index[.270 ] hrDeviceDiskStorage [A:\] [unknown]
index[.271 ] hrDeviceDiskStorage [D:\] [unknown]
index[.272 ] hrDeviceDiskStorage [Fixed Disk] [running]
index[.273 ] hrDeviceKeyboard [IBM enhanced (101- or 102-key) keyboard, Subtype=(0)] [running]
index[.274 ] hrDeviceSerialPort [COM1:] [unknown]
Scan Ended
Audit storage
------------------------------------------
Host PENELOPE
IP add : [12.1.1.4]Audit Storage
Audit Storage for : 12.1.1.4
List disk usage
index[.2 C:\ Label: Serial Number 80295df3] 97.16% 145733/150000 Mo
WARNING Host [12.1.1.4] AS Low disk C:\ Label: Serial Number 80295df3 : Reached 97% 145733/150000 Mo
index[.3 D:\ Label:HTC_FRANCE Serial Number ba2dc27b] 100.00% 420/420 Mo
WARNING Host [12.1.1.4] AS Low disk D:\ Label:HTC_FRANCE Serial Number ba2dc27b : Reached 100% 420/420 Mo
index[.4 Virtual Memory] 33.93% 1460/4303 Mo
index[.5 Physical Memory] 57.67% 1180/2046 Mo
Scan Ended
Audit System
------------------------------------------
Host PENELOPE
IP add : [12.1.1.4]
Audit System
Audit system Information for : 12.1.1.4 8
Host Informations
Name [PENELOPE]
Location [--]
Contact [--]
Uptime [0 days 1 hours 48 minutes 12.000 secondes]
Description [Hardware: x86 Family 6 Model 15 Stepping 6 AT/AT COMPATIBLE - Software: Windows Version 6.0 (Build 6000 Multiprocessor Free)]
SysObjectID [microsoft.1.1.3.1.1]
SysServices [79]
IpForwarding [not-forwarding]
Scan Ended
Display ARP Table
------------------------------------------
Host PENELOPE
IP add : [12.1.1.4]
Found 13 entry
13 ARP entry
-- 127.0.0.1
-- 224.0.0.22
00:00:00:00:00:00: 12.1.1.2
00:00:00:00:00:00: 12.1.1.4
00:00:00:00:00:00: 12.1.1.15
00:80:77:85:4A:3E: 12.1.1.30
00:D0:95:8A:BF:16: 12.1.1.70
00:0E:35:42:97:DC: 12.1.1.100
00:E0:1E:80:1C:6C: 12.1.1.250
00:16:AE:B6:A1:12: 12.1.1.252
00:00:00:00:00:00: 169.254.0.0
01:00:5E:00:00:16: 224.0.0.22
01:00:5E:00:00:16: 224.0.0.22
Scan Ended
Host Number : 1
: PENELOPE
Session>//////////////////////////////////////////////////
ip : 12.1.1.4
ip_add : 67174668
name : PENELOPE
status : 2
communityro : public
communityrw : public
user1 : (null)
user2 : (null)
user3 : (null)
sysid : microsoft.1.1.3.1.1
sysname : (null)
groupref : 0
isinrepair : 0
trapreceived : 0
sla : 1
ri_ifgraph : 0
ri_ifinoctets_p : 0
ri_ifoutoctets_p : 0
snmppolling : 1
pingpolling : 1
timeslast : 1211961096
UID : 5182014055648329735
www.loriotpro.com |
|